20 Important Tools For Hardwood Flooring Installation Done

tools for hardwood flooring installation

Let’s suppose that you are now ready to turn your home improvement project into a reality. It doesn’t matter whether you’ve bought a house that needs a lot of remodeling or you’ve finally thought of renovating the house like the one dreamed of. Whatever the case might be, you should not overlook remodeling the flooring of your house.

Installing floors in the house is not a DIY undertaking at all. It requires experience, expertise, and a lot of patience. One wrong move, and you might have to tear down all the floor and start over again. So, experts highly suggest that you always hire one of the best local flooring companies near you when considering a hardwood flooring installation project.

Come to think about it, when you search online for the top flooring companies near you, you’ll be surprised to see that a lot of companies are claiming to be your best bet for it. However, not all of them will be able to proffer up to the mark services. Why? Well, the answer is simple! This is because they do not have an ample amount of working experience plus they do not have access to the right tools of the trade.

Did you know that according to NWFA, there are more than 50 tools that a hardwood flooring company ought to have? We’ve managed to narrow down the list to 20 important tools for hardwood flooring installation.

Important Tools For Hardwood Flooring Installation

When it comes to the hardwood floor installation project, the local flooring companies must have the following 20 tools if you want the flooring project to go as smoothly as possible.

Note: Most of the mentioned tools will also be used during the finishing process, but we’ve managed only to focus on the installation process for now.

#1: The Safety Goggles

The former thing that you want to risk is the health and safety of yourself and your loved ones, right?

So, if you are going to stick around the house, make sure that you have safety goggles with you. This is because you’d never know when wood pieces come flying at you and hit you right in the eye which can cause permanent damage. Make sure that the workers of local flooring companies are wearing them too.

#2: The Dust Mask

Installation of hardwood floor requires sanding and to avoid inflammation and also it can cause shortness of breath. Therefore, it is highly suggested that one should wear a vapor respirator and a dust mask. The dust mask will protect the lungs from wood dust.

#3: The Ear Plugs

We all know that long exposure to a lot of loud noise can cause hearing loss. Wearing high-quality earplugs will be beneficial. This is because a saw can create noise up to 100 decibels. This is enough to damage the internal mechanism of the ear in just a couple of minutes.

A lot of hardwood floor installers have become victims of hearing loss since they’ve never taken such precautions.

#4: Knee Pads

Knee pads are important because, to be honest, the workers ought to spend much of their time on their knees. The knee pads prevent the workers from pain and strain.

Don’t worry about the knee pads damaging the surface of the floors, is the outer layer of knee pads are made of cloth.

#5: Safety Boots

When it comes to installing floors, the danger to the feet is quite obvious. A flooring expert must wear slip-resistant shoes, have safety toes, and need to be well cushioned. Athletic shoes are not at all recommended. So, if you see a worker wearing them, you need to ask them to change them or leave the worksite.

#6: Gloves

Now that your knees and feet are well protected, protecting your hands holds the same significance.

Gloves that have reinforced fingertips are highly recommended for such jobs.

#7: The Feather Boards

The workers of the local flooring companies need to use a feather board to push the stocks past the cutting edges whenever they have to use the table saw. The board does not only create a smoother cut but it also prevents the hand from kicking back when it gets near to the table saw’s blade.

#8: Testers (Electrical)

Too little or too much power can burn the motor of your machines, which is why you need to have an electrical tester with you at all times. This will help the workers to know if their machines can be operated safely or not.

#9: Moisture Meters

Did you know that determining the content of moisture in the hardwood flooring is vital for a job well done? If the hardwood planks have a lot of moisture, it’ll start to show cracks, start to bulk after it has been installed!

#10: RH Testing System

If you plan on installing hardwood flooring on a slab of concrete, it is important to know the moisture level of the slab. If there is a lot of moisture in the slab, the hardwood will not stick to it, the wood will crack, or even start to bulk.

#11: Measuring Tape

A tape measure is a tool that every hardwood flooring expert must-have. A measuring tape can cumulate all the inaccuracies that might affect the hardwood installation process.

Without a measuring tape, a hardwood flooring expert of the best flooring companies is just as useless as a car without a steering wheel.

#12: The Level

A level is a tool that tells you that the floor is even or not and is it ready for wood flooring or not.

Installing hardwood floors on an uneven surface is not recommended as it’ll cause a lot of issues in the long-run.

A level is available in 4 and 6 feet. Make sure that your hardwood flooring expert has a level in both sizes.

#13: Carpenter’s Square

A carpenter’s square helps in measuring the edges and 90-degree angles. It helps in marking cuts on the stock. A carpenter square is available in plastic and metal and will help the workers in setting proper angles on the table saw when they’re cutting the corners.

Whereas, using such tools without prior knowledge might be a challenge.

#14: Spacers

Do you know that spacers are used to measure the expansion gaps of the hardwood floors? This is because the absorption and release of moisture can cause the hardwood floors to expand or contract.

The spacers will help in leaving a small area around the floors for expansion and contraction.

#15: Saws

The table saws are great if you are cutting planks of hardwood floors. Whereas, if the experts need to cut small pieces of hardwood, hand saws turn out to do a good job. Using them will require a lot of force but they do not produce a lot of noise or dust. So, make sure that the workers have a hand saw as well.

#16: Nails And Nailing Machines

You need a lot of nails to set the wooden planks down to the surface of the floor. A nailing gun or a machine will save time and make sure that each nail is properly driven in the ground.

There are a lot of nailing machines, however, experts will use the ones that they’re comfortable with.

#17: Fasteners

When it comes to attaching the hardwood floors to the concrete slabs, they’ll need to be set with fasteners. If the top flooring companies use cut nails or screws to fasten the hardwood floors to the concrete slabs, you can have peace of mind; they can also be used instead of the fasteners.

#18: Rubber Mallet Or Hammer

It is highly recommended that an expert ought to use a rubber mallet or a hammer that is approved for hardwood floors. If not, then you can expect a lot of stains and marks on the floors after with strike. A mallet has ahead of rubber which does not leave scuff marks on the floors. So, using a rubber mallet is better than using a non-approved hammer.

#19: Trowel

The local flooring companies use trowel to get adhesive down the subfloors. There are two types of trowels available in the market, V-shaped and square trowels.

Both of them serve the same job. Just make sure that is grip is made of rubber as it providers a stronger grip. Also, if you wish to keep the trowel in a good condition, remember to clean it off before the adhesives dry.

#20: Tapping Block

The tapping blocks help in placing the hardwood planks in a tight place. The tapping blocks are made of plastic and are inexpensive. Using tapping blocks will prevent chipping and the damages done to the hardwood planks.

Final Thoughts

The above-mentioned tools will help the expert of the top local flooring companies to ensure that the hardwood flooring project is done in the best possible way. Also, keep in mind that most of the tools can be rented from the local hardware stores near you. If the experts do not have some of the tools, you can lease them for their convenience.

Leave a comment

"application/ld+json">{"@context":"https://schema.org","@type":"FAQPage","mainEntity":[{"@type":"Question","name":"20 Important Tools For Hardwood Flooring Installation Done","acceptedAnswer":{"@type":"Answer","text":"When it comes to the hardwood floor installation project, the local flooring companies must have the following 20 tools if you want the flooring project to go as smoothly as possible.\n#1: The Safety Goggles\n#2: The Dust Mask\n#3: The Ear Plugs\n#4: Knee Pads\n#5: Safety Boots\n#6: Gloves\n#7: The Feather Boards\n#8: Testers (Electrical)\n#9: Moisture Meters\n#10: RH Testing System\n#11: Measuring Tape\n#12: The Level\n#13: Carpenter’s Square\n#14: Spacers\n#15: Saws\n#16: Nails And Nailing Machines\n#17: Fasteners\n#18: Rubber Mallet Or Hammer\n#19: Trowel\n#20: Tapping Block"}}]}